Mouse move on Image to zoom

Share with your Friends:

Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms, 800 Watts RMS @ 2 ohms and 1200 Watts RMS @ 1 ohm; Remote Subwoofer Level Control

$276.12
Old price : $334.99

Polk Audio Part#: PAD1000.1 747192121914 - Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms, 800 Watts RMS @ 2 ohms and 1200 Watts RMS @ 1 ohm; Remote Subwoofer Level Control

Polk Audio PA D1000.1 Class D MOSFET Monoblock Mobile Audio Amplifier; 500 Watts RMS @ 4 ohms, 800 Watts RMS @ 2 ohms and 1200 Watts RMS @ 1 ohm; Remote Subwoofer Level Control

The PA D1000.1 offers an ultra-compact, minimalist design. A toroidal transformer helps keep the amplifier's sleek aluminum extruded design under 2" tall while ensuring plenty of clean, efficient power. A low THD, a high signal-to-noise ratio, plus wide bandwidth frequencies, make the new PA D1000.1 a high performance monoblock for high performance bass.

Key Features
  • Super-efficient class D design-runs much cooler than conventional amps
  • High-speed MOSFET switching-Power supply with outputs stable into 1 ohm loads
  • Protection-Thermal, DC offset, reverse polarity and short circuit protection
  • Variable low-pass filter 40 Hz-220 Hz
  • Variable subsonic filter 20 Hz-38 Hz
  • Bass boost at 0 dB-12 dB
  • Bass boost at 44 Hz
  • Remote subwoofer level control
  • Nickel-plated wire terminals & RCA connectors
  • Level control-adjusts the gain of the channel to match the output voltage from your head unit
  • Line level outputs-provides a full range signal for easy connection to additional amplifiers
  • Stainless steel hardware
Specifications
  • RMS Continuous Power @ 4 Ohms: 500W
  • RMS Continuous Power @ 2 Ohms: 800W
  • RMS Continuous Power @ 1 Ohm: 1200W
  • Distortion at Rated Power: <0.1%
  • Signal-to-noise Ratio: 105 dB
  • Frequency Response: 20Hz - 200Hz
  • Damping Factor: >150
  • Crossover Filter Slope: 12dB/octave
  • Input Sensitivity: 200mV - 6V
  • Supply Voltage: 10V - 16V
  • Power Connections: 4 AWG
  • Ground Connections: 4 AWG
  • Speaker Connections: 12 AWG
  • Dimensions: 1 13/16" x 6 3/4" x 12 15/16"
  • Weight: 6.5 lbs

Features:

  • Super-efficient class D design-runs much cooler than conventional amps
  • High-speed MOSFET switching-Power supply with outputs stable into 1 ohm loads
  • Protection-Thermal, DC offset, reverse polarity and short circuit protection
  • Nickel-plated wire terminals & RCA connectors-Ensure maximum signal transfer
  • Level control-adjusts the gain of the channel to match the output voltage from your head unit

Catalog Numbers:

  • FGBRPAD1000.1

UPCs:

  • 747192121914

EAN:

  • 0747192121914
  • Manufacturer: Polk Audio
  • Part Number: PAD1000.1
  • Model: PAD1000.1