-
Mueller/B & K 108-904RP Backflow Preventer-Vacuum BreakerAttached to sill cocks, valves, and hydrants with Male hose thread outlet. For indoor or outdoor use. Designed to prevent dangerous back siphonage and back flow into a potable water supply. Furnished with break-a-way lock screw if vandal-resistant installation is desired. For nonfreezing areas only....$5.60$8.42
-
-NEW- Solenoid Valve 1/4" Normally Closed (N.C.) 12VDC Nylon (NEW Improved Crack-resistant Polymer) Blue Cap by U.S. SolidAll blue cap valves are designed with new polymer formula engineered to withstand 20% more tightening torque without cracking the polymer body. U.S. Solid Normally Closed Electric Solenoid Valve; 1/4" ports, engineering plastic(Nylon) body, nitrile rubber (NBR) seal, 12 volt DC, for air, water U.S...$10.99$10.99
-
Dixon FBVG75 Brass Ball Valve, 3/4" NPT FemaleThis Dixon FBVG75 ball valve is made of forged brass for higher corrosion resistance than steel and has a plastic-covered lever handle for on/off manual control. This inline valve has a full port flow for higher operating efficiency than standard port and 3/4" female National Pipe Taper (NPT) thread...$15.31$15.31
-
Camco 40539 Heavy-Duty 20lb or 30lb Dual Propane Tank Cover (Black)Camco's Heavy-Duty Dual Propane Tank Cover is made of heavy-duty polypropylene and protects propane gas bottles from flying debris while streamlining the look of your rig. Easy to assemble in about 15 minutes with supplied hardware. Slip the custom molded assembled unit over the bottles for a safe,...$40.42$43.81
-
Duda Energy 2PCBV-WOG200-F075 Full Port Ball Valve, 2 Piece, 3/4" NPT, 304 Stainless Steel with Blue Vinyl Handle.75"2-Piece Stainless steel ball valves with PTFE seals & seats by Duda Energy Duda Energy Stainless steel ball valves with PTFE (Teflon) seats & seals offer excellent corrosion resistance for most applications. Stainless steel & PTFE work well in applications including but not limited to water, oil, ga...$12.28$12.28
-
Anderson Metals 06124 Brass Pipe Fitting, 45 Degree Barstock Street Elbow, 1/4" Female x 1/4" Male PipeThis Anderson Metals 06124 45-degree barstock street elbow is a brass pipe fitting with 1/4" male and 1/4" female threaded connections. The 45-degree street elbow fitting, or "street ell," connects two pipes at a 45-degree angle to change the direction of flow between pipes. It has male threads on o...$5.82$5.82
-
Banjo HB050-90 Polypropylene Hose Fitting, 90 Degree Elbow, 1/2" NPT Male x 1/2" BarbedThis Banjo HB050-90 barbed hose 90-degree elbow is made of glass-reinforced polypropylene and has a 1/2" barbed connection on one end and a 1/2" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection at a 90-degree angle to change the direction of f...$1.75$4.16
-
Anderson Metals 56122 Brass Pipe Fitting, Hex Nipple, 3/8" x 3/8" NPT Male PipeThis Anderson Metals 56122 hex nipple is a brass pipe fitting with 3/8" male NPT threads. The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a...$3.59$5.47
-
Motorad MGC-837 Fuel CapManufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evap...$3.94$6.12
-
Anderson Metals 56121 Brass Pipe Fitting, Cored Hex Head Plug, 1/4" NPT Male PipeThis Anderson Metals 56121 cored hex-head plug is a brass pipe fitting with 1/4" male NPT threads. The cored hex-head plug fitting inserts into a pipe or fitting to close and terminate its end. It has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a tighter...$3.34$1.43
-
Banjo HB050 Polypropylene Hose Fitting, Adapter, 1/2" NPT Male x 1/2" BarbedThis Banjo HB050 barbed hose adapter is made of glass-reinforced polypropylene and has a 1/2" barbed connection on one end and a 1/2" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection. This schedule 80 adapter is made of glass-reinforced polypr...$1.04$4.25
-
Milton S-449 Valve Insertion ToolValve insertion tool is easy to use; simply thread valve onto end of valve insertion tool and lever through the rim hole. For the insertion or removal of snap in type tubeless tire valves.$7.19$10.13