Dixon Valve hex head plug. Made of brass. 1/8-inches NPT male. Hex head plug is hollow.

This Dixon Valve TTA75 PTFE (polytetrafluoroethylene) sealant tape is 260" long, 3/4" wide, and 3.5 mil thick. The white color tape has an operating temperature range of -212 to +500 degrees F and is suitable for use in wrapping threads to create air and water tight pipe connections (not including g...

Cartridge Bilge Pumps 500 GPHFor 500 GPH, we have improved the design with easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. The pumps are delivered including both a straight and a 90 degree smooth elbow Dura-Port as well as a removable chec...

This Dixon 179-0606 brass hose splicer tee fitting is suitable for joining three hoses. This tee fitting is T-shaped and has three openings to connect and branch three hoses, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represented...

This Dixon SE series 90 degree elbow is used for changing flow direction. It has male and female National Pipe Taper (NPT) threads for connecting female threaded pipe to male threaded pipe. It is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability....

This Anderson Metals 38106 reducing tee is a red brass pipe fitting two 3/4" and one 1/2" female threaded connections. The reducing tee is a T-shaped fitting with three openings to connect and branch three pipes with different diameters, two on the main run and one branch at a 90-degree angle from t...

This Banjo HB075-050 barbed hose adapter is made of glass-reinforced polypropylene and has a 1/2" barbed connection on one end and a 3/4" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection. This schedule 80 adapter is made of glass-reinforced po...

This Anderson Metals brass compression hose fitting connector has a male end for connecting to threaded pipe conforming to National Pipe Thread (NPT) standards and a barbed fitting for connecting to a hose. The barbed fitting on one end creates a tight seal on flexible or semi-rigid hose when used w...

This Anderson Metals hose fitting is made of brass and connects hose to threaded pipe conforming to the National Pipe Thread (NPT) standard. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight s...

Keep your food and drinks cold for the full length of your next boating excursion with the Coleman 100-Quart Coastal Xtreme Series Marine Portable Cooler. Specially designed for boating and fishing, this portable cooler combines a generous capacity with a rugged design that stands up to tough saltwa...

Fuel additives keep your fuel optimized, protect your fuel system and remove leftover deposits that rob your engine of peak performance and efficiency. Part of Quicksilver's comprehensive three step fuel treatment system, Quickleen is a deep cleaning fuel additive that's easy to use-simply pour it i...

This Banjo HB050-038 barbed hose adapter is made of glass-reinforced polypropylene and has a 1/2" barbed connection on one end and a 3/8" male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection. This schedule 80 adapter is made of glass-reinforced po...