This Dixon Valve TTB75 PTFE (polytetrafluoroethylene) sealant tape is 520" long, 3/4" wide, and 3.5 mil thick. The white color tape has an operating temperature range of -212 to +500 degrees F and is suitable for use in wrapping threads to create air and water tight pipe connections (not including g...

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, b...

The Anderson Metals coupling pipe fitting is made of brass and has female National Pipe Taper (NPT) threaded connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female NPT threads for connecting to male threaded pi...

This Anderson Metals 56122 hex nipple is a brass pipe fitting with 3/8" male NPT threads. The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a...

This Anderson Metals 56122 hex nipple is a brass pipefitting with a 1/4" male NPT threaded connection. The nipple fitting is a short length of pipe with threaded ends for connecting two threaded pipes. It has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a...

This Dixon BMA series brass adapter has a female GHT threaded end, male NPTF threaded end, and connects hoses or fittings of different types. This fitting has female garden hose threads (GHT) to connect to a male GHT connection and male National Pipe Taper Fine (NPTF) threads to connect to a female...

This Anderson Metals 56101 barstock tee is a brass pipe fitting with 1/4" female NPT threads. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represe...

This Valterra 200-C15 check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it...

The 5613 is ideal for testing vacuum lines and components. Accurately tests low-pressure fuel systems. Quickly diagnose internal engine problems such as bad rings valves and leaking head gaskets. Kit comes complete with adapter for most applications. Pin point hard to find problems such as cracked l...

The Anderson Metals street tee pipe fitting is made of brass barstock and has female and male National Pipe Taper (NPT) threaded connections. This street tee is a T-shaped fitting with three openings used to connect and branch three female and male pipes, two on the main run and one branch at a 90-d...

This Kerick MA052 float valve is a tank-mount style with an adjustable arm, and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.093" orifice and its estimated rate of flow is 1.3 gallons per minute (gpm) at 40 pounds per square inch (psi) and 1.5 gpm at 60 psi. The valve inlet h...

The Anderson Metals adapter pipe fitting is made of brass and has a male National Pipe Taper (NPT) threaded connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has male NPT threads on one end and femal...