This Dixon Valve TTB75 PTFE (polytetrafluoroethylene) sealant tape is 520" long, 3/4" wide, and 3.5 mil thick. The white color tape has an operating temperature range of -212 to +500 degrees F and is suitable for use in wrapping threads to create air and water tight pipe connections (not including g...

Set of 2 - Black Chrome FinishFor Tubing with 3/8" ID (Inner Diameter)G1/4" Threads with black o-ring for leak-proof seal

MA200 features 5/8" male to 3/8" female for use with mic stands with European 3/8" threads.

The Anderson Metals coupling pipe fitting is made of brass and has female National Pipe Taper (NPT) threaded connections. This coupling fitting connects two pipes going in the same direction with the same diameter to extend a straight run. It has female NPT threads for connecting to male threaded pi...

This Anderson Metals 56122 hex nipple is a brass pipe fitting with 3/8" male NPT threads. The hex nipple fitting is a short length of pipe with threaded ends for connecting threaded pipes, and it has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a...

Packed with PTFE, Slic-tite Tape provides a highly resistant seal on pipe threads for all types of service. This high-density tape works with several types of systems, and it permits easy disassembly, even after many years of service.

This Anderson Metals 56122 hex nipple is a brass pipefitting with a 1/4" male NPT threaded connection. The nipple fitting is a short length of pipe with threaded ends for connecting two threaded pipes. It has male National Pipe Taper (NPT) threads for connecting to female threaded pipes, creating a...

This Dixon BMA series brass adapter has a female GHT threaded end, male NPTF threaded end, and connects hoses or fittings of different types. This fitting has female garden hose threads (GHT) to connect to a male GHT connection and male National Pipe Taper Fine (NPTF) threads to connect to a female...

Flexible goosenecks in 6, 13 and 19 inch lengths, respectively, attach to any microphone stand or adaptor with standard 5/8 inch -27 male and female threads. Inside diameter is .338 inches. For nearly 20 years, The Music People! Inc. has been one of the nation’s leading suppliers of microphones and...

This Anderson Metals 56101 barstock tee is a brass pipe fitting with 1/4" female NPT threads. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represe...

Flexible goosenecks in 6, 13 and 19 inch lengths, respectively, attach to any microphone stand or adaptor with standard 5/8 inch -27 male and female threads. Inside diameter is .338 inches. For nearly 20 years, The Music People! Inc. has been one of the nation’s leading suppliers of microphones and...

Permatex High Temperature Thread Sealant lubricates threads for easy assembly and disassembly and locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels and won’t shred or wear like other tape. Parts may be repositioned up to 4 hours afte...