This Anderson Metals 56101 barstock tee is a brass pipe fitting with 1/4" female NPT threads. The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. Pipe dimensions for tees are represe...

Camco RV Water Tank Filler with Shutoff Valve helps fill your water tank in a fraction of the usual time and eliminate “bubble-back.“ Large 5/8" fill tube allows you to fill your camper, trailer or motorhome water tank at or near full pressure while minimizing line backflow. Quarter-turn pressure-se...

This Valterra 200-C15 check valve is made of clear schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it...

This Pentek CBC-10 carbon filter cartridge reduces fine sediment, chlorine taste and odor, and protozoan cysts in residential and commercial drinking water. It has a nominal (85%) filtration rating of 0.5 micron, and 99.95% efficiency for the reduction of protozoan cysts. It will reduce free availab...

The Anderson Metals street tee pipe fitting is made of brass barstock and has female and male National Pipe Taper (NPT) threaded connections. This street tee is a T-shaped fitting with three openings used to connect and branch three female and male pipes, two on the main run and one branch at a 90-d...

The SINGER Stylist 7258 100-Stitch Computerized Sewing Machine offers great value because it comes with loads of free accessories. The sewing machine is provided with 100 built-in stitches making fashion sewing, home and decorative sewing, quilting, crafting and heirloom sewing easier. Thanks to its...

This Kerick MA052 float valve is a tank-mount style with an adjustable arm, and is made of PVC with 18-8 stainless steel hardware. The valve has a 0.093" orifice and its estimated rate of flow is 1.3 gallons per minute (gpm) at 40 pounds per square inch (psi) and 1.5 gpm at 60 psi. The valve inlet h...

Advantage of RAINPAL Rain Barrel Spigot Design: You don't need to reach inside of the barrel to install. You only need a small opening(Bung hole is big enough) to install. Install in 6 easy steps: Drill, Drop, Pick, Tighten, Wrap and Tighten. Installation Instruction: Tools needed: Pipe Wrench o...

The Anderson Metals adapter pipe fitting is made of brass and has a male National Pipe Taper (NPT) threaded connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has male NPT threads on one end and femal...

The Honeywell MS7120 Orbit barcode reader is black, can be held in the hand or set on a stand, produces laser light in an omnidirectional pattern, and can be used to scan linear, one-dimensional (1D) barcodes at different angles and decode them. The barcode scanner is small enough to be held in the...

The Anderson Metals adapter pipe fitting is made of brass and has a male National Pipe Taper (NPT) threaded connection and a female NPT threaded connection. This adapter fitting connects pipes or fittings with different end types, diameters, or materials. It has male NPT threads on one end and femal...

Hose fittings connect, control, change the direction of, and terminate the flow in piping and hose systems. They are made of brass, stainless steel, galvanized steel, and other materials that resist corrosion, pressure, and wear. Hose fittings have various types of connections, including threaded, b...