This Pentek 150296 SW-3 wrench is used to loosen the sumps of water filter housings. It is made of strong plastic. This wrench fits the sumps of Pentek #10 Big Blue filter housings, which are used in a wide variety of applications, including drinking water purification, irrigation, and industrial pr...

This Pentek 150578 MC-1A bracket is used to mount filter housings on a vertical surface. It is made of strong metal. This bracket is used with Pentek #10 and #20 3G MB housings with 3/4" connections, which are used in a wide variety of applications, including drinking water purification, irrigation,...

The Pentek P250A water filter set filters the water twice producing healthier and better-tasting drinking water and cooking water. NSF International Certified to Reduce MTBE. The Pentek P-250A reduces 99% of dissolved lead. The PEntek P-250A water filters remove greater than 99.95% of Cryptosporidiu...

This Pentek PD-1-934 polypropylene filter cartridge reduces sand, silt, scale, and rust particles in commercial drinking water and industrial fluid applications. It has a nominal filtration rating of 1 micron at an efficiency of 85%. The filter is made of thermally bonded polypropylene microfibers f...

This Pentek 150071 3/4" #10 Standard clear filter housing with pressure relief is suitable for residential, commercial, and industrial applications. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polyp...

This Pentek ECP5-BB pleated cellulose polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media ple...

This Pentek R50-BB pleated polyester filter cartridge reduces sand, dirt, silt, rust, and scale particles in residential and commercial water. It has a nominal filtration rating of 50 microns at an efficiency of 85%. The filter is made of resin-impregnated cellulose and polyester media pleated aroun...

This Pentek 150539 SW-1A (previously SW-1) wrench is used to loosen the sumps of water filter housings. It is made of strong plastic. This wrench fits the sumps of Pentek Slim Line filter housings, which are used in a wide variety of applications, including drinking water purification, irrigation, a...

The PENTEK-GAC-10 cartridge provides effective reduction of chlorine and bad taste and odor from your drinking water. The filter cartridge is manufactured to prevent channeling or bypass and maximize contact with the filter media. The innovative post-filter reduces carbon fines before the water leav...

This Pentek 153128 #10 clear housing sump fits caps for Pentek #10 Standard clear filter housings with any inlet and outlet size, and same size caps made by several other manufacturers. It is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition. This sump mee...

This Pentek 151120 OR-34 O-ring is used to seal water filter housings with 3/4-inch inlet and outlet ports. It is made of nitrile butadiene rubber (Buna-N) for flexibility and resistance to abrasion and tearing. This O-ring fits Pentek Standard and 3G Standard filter housings, which are used in vari...

This Pentek EP-10 carbon block filter cartridge reduces fine sediment and chlorine taste and odor in residential and commercial drinking water. It has a nominal (85%) filtration rating of 5 microns. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 90% in...