This Anderson Metals 56115 hex drive countersunk plug is a brass pipe fitting with 3/8" male NPT threads. The countersunk plug with a hex drive inserts into a pipe or fitting to close and terminate its end and has a recessed hex head for increased bearing load. It has male National Pipe Taper (NPT)...

This Valterra 200-07F check valve is made of white schedule 40 PVC (polyvinyl chloride) for strength and resistance to corrosion and mild chemicals. Its EPDM (ethylene propylene diene monomer) seal resists degradation caused by water and oils, and the swing/spring construction of this valve makes it...

The Merit Brass class 150 stainless steel 316 cast pipe fitting is a 90-degree street elbow with male and female National Pipe Taper (NPT) threads for changing flow direction between two pipes. This elbow is made of stainless steel 316, which is higher strength and more corrosion resistant than stai...

This Anderson Metals hose fitting is made of brass and has a 90-degree elbow shape for connecting hose to threaded pipe conforming to the National Pipe Thread (NPT) standard at an angle. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic....

The Brennan N2404-SS series double-ferrule adapter fitting is made of stainless steel and has tube and NPT male connectors. This coupler fitting connects two pipes going in the same direction to extend a straight run. It is a push-to-connect fitting that connects to pipes or tubing on one end and ha...

LDR 020 9645 Pressure Gauge, 3/4-Inch IPS, 200 lb. PressureSize:0.75 Inch NPT | Style:200 PSI From the Manufacturer 3/4-Inch NPT 200 lb. Pressure Gauge for Use With Water Only. CSA Approved and 100 percent Pressure Tested at the Factory.Manufactured by: LDR Industries

Bowl fuel tank filter top cap with 3/4" NPT pipe fittings for standard and water-absorbing GOLDENROD bowl fuel tank filters.

Camco's Propane Quick-Connect Kit is for use with low pressure propane systems. Quickly and easily add a convenient connect/disconnect method with an additional safety shut off. Kit includes a 1/4" Female NPT x Female Quick Connect valve and a 1/4" male NPT x Male Quick Connect full flow plug.

This Anderson Metals hose fitting is made of brass and connects hose to threaded pipe conforming to the National Pipe Thread (NPT) standard. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight s...

' Elbow, 90 Degrees , Plastic, Body Material Polypropylene, Connection Type Barbed x MNPT, Barb Size 3/4 In., Pipe Size 3/4 In., Max. Pressure 150 psi @ 70 Degrees F, Temp. Range -20 Degrees to 150 Degrees F, Color Black '

18" hose for hard to reach areas. For use with hand and air powered grease guns. Size: 18". Working Pressure (PSI): 4,500. Burst Pressure (PSI): 10,000. NPT (IN): 1/8"

'Bulkhead Tank Fitting, Body Material Polypropylene, Pipe Size 1-1/2 In., Connection Type FNPT x FNPT, Required Hole Size 3 In., Gasket Material EPDM, Max. Pressure 150 psi, Length 1 In., Temp. Range -20 Degrees to 150 Degrees F, Color Black'