-
SharkBite Deburring Pipe and Depth Gauge Tool, Copper, CPVC, Pipe, 1/4 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 1 inch, U702A" SharkBite Deburr & Depth Gauge Tool Our 2-in-1 tool is designed to simplify your plumbing project when using copper or CPVC tubing. Use it to remove burrs from copper pipe or CPVC pipe and to mark correct insertion depth for SharkBite fittings. The mark is used to confirm that the fitting is seate...$6.76$10.60
-
Rectorseal 23631 1/4 Pint Brush Top T Plus 2 Pipe Thread Sealant4 OZ, T Plus 2 Thread Sealant, Non-Setting, Multi-Purpose Compound, Contains Teflon and Synthetic Fibers To Create A Stronger Seal, Use On Threaded Galvanized Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, RTRP, PVC, CPVC and ABS Pipe, May Be Pressurized Immediately Following A...$6.52$6.52
-
Watts P-960 J-Hook for 1/2-Inch PEX Pipe Support, 100-PackHolds Pex, Copper, CPVC & Polybutylene to floor joists or rafters. J hook pipe hanger 1/2" Holds Pex, Copper, CPVC & Polybutylene to floor joists or rafters 100 pack.$10.65$20.30
-
SharkBite PEX Tubing Cutter, 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 Inch Tube Cutter, U701ASharkBite PEX Tubing Cutter For clean, straight cuts, use with 1/4″, 3/8″, 1/2″, 3/4″ and 1″ SharkBite PEX tubing. Place PEX tubing inside cutter. Squeeze PEX Cutter Tool on PEX tube and tool easily adjusts to PEX tube dimensions. Push handles together until it you hear the click and you’re done. CU...$15.58$13.29
-
NIBCO 4707 Series CPVC Pipe Fitting, 90 Degree Elbow, 1/2" SlipThe NIBCO 4707 90-degree elbow pipe fitting is made of chlorinated polyvinyl chloride (CPVC) and has slip connections. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It has female slip openings for sliding over the ends...$8.23
-
SharkBite U710A Disconnect Clip, 1/2-Inch1/2" Disconnect Clip, Sharkbite Push Fit Fittings For Use With Copper Tubing CTS, CPVC and Pex With Integral Tube Liner Included, Constructed Of DZR Brass, Certified To 200 PSI and 200 Degrees Fahrenheit, Design Certified To ASSE 1061/NSF61 Standards, Meets UPC, IPC and CUPC Requirements, Fitting Ar...$.85$1.99
-
Homewerks VHN-QTR-B4B Hose Bibb with 1/4-Turn and No-Kink Design, Female Thread, Brass, 3/4-InchIt's the easiest way to join copper, CPVC or PEX pipe in any combination with no soldering, clamps, unions or glue. Just insert the pipe and the stainless steel teeth bite down and grip tight, while a specially formulated O-ring compresses to create a perfect seal. 3/4" female iron pipe No-kink desi...$8.91$5.99