Handle Bar mounted Mini Rocker Switch with Standard Bullet Connectors for use with 1,500lb-5,000lb ATV/UTV/SxS winch. Specs: - Waterproof/Weatherproof - Works with any standard, 12V industry ATV/UTV contactor/solenoid/relay - Requires auxiliary power - Splicing of wires may be required - Install...

Replacement Contactor for KFI Winch Kits

For use with 12v winches rated 1,500-5,000lbs, sealed and potted electric VIPER contactor/solenoids include quick connect/disconnect connectors. Treated with a moisture absorbing chemical and standard silver internals cut down on corrosion. Specs: - Rated for use with 12v winches rated 1,5000-5,000l...

Applications: Winch Motors, Snow Plow & Spreader Motors, Windlasses, Hydraulic Pump Motors & Other Reversible Motors that Normally Require Multiple Solenoids75 Amp Make and Break:Maximum on time: 5 Minutes.125 Amp Make and Break:Maximum on time: 30 Seconds.150 Amp Make and Break:Maximum on time: 0.5...

Features: panel mounted, advanced pre-setting one week before, digital electronic timer switch with daily programs, repeat programs with 17 on/off setting and manual over-ride, auto timer error correction +- 30 sec, weekly. Please note: this product can not directly control high current, please use...

The main limitation to controlling dust collectors is the start up current surge - not the running current. In many cases the start up current can be as much as four to five times the running current and last for several seconds. This initial surge can over time damage the contacts in the iVAC Dust...

Momentary type, 1 NO contact, 2 screw terminals. This metal push button switch is suitable for 16mm diameter mounting hole. Used widely for circuits control in electromagnetic starter, contactor, relay and other electric circuits.

Winch Motor Reversing Solenoid For Contactor Relay 6 Term

SA float switch is a device used to sense the level of liquid within a tank. The switch may actuate a pump, an indicator, an alarm, or other device.It can be easily converted from normally open to normally close by inverting the float.Note: because the current that the switch can carry is much littl...

Winch Contactor; Replacement For 3.0; 2.5; And A2500; - Weather Resistant - Handles High Amps