Hang with us. Mount your large TV with a tested & highly rated wall mount. You’ve finally got a 65” beauty of a TV. Why limit its functionality by leaving it sit on the cheap plastic stand it came with? With a large full motion TV mount, you can extend, swivel, and tilt to your heart's desire, all w...

Compatibility: This product has been tested and validated to ensure it will work with Baofeng, Sirius, XM, HAM Radio FM Transmitters; Vktech, Hopkins Car Cooling Fans; GPS Trackers; ARB, Coleman, Dometic, Engel, Igloo, Koolatron, Princess, Coolers Fridge Freezers/RefrigeratorsKensun D1002, LifeLine,...

This Pentek C1 carbon filter cartridge reduces fine sediment and chlorine taste and odor in residential drinking water. It has a nominal (85%) filtration rating of 5 microns, and will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 75% in up to 2500 gallons at a recomme...

This Pentek 150539 SW-1A (previously SW-1) wrench is used to loosen the sumps of water filter housings. It is made of strong plastic. This wrench fits the sumps of Pentek Slim Line filter housings, which are used in a wide variety of applications, including drinking water purification, irrigation, a...

HOSE ELBOW - Hose barb elbow. UPC flag tagged. Barb x Male pipe. 1 piece, except swivels(nut & stem) Use with plastic tubing or rubber hose. 32 to 250 degree f. temperature range. Intended for use with hose clamp or crimp type ferrule. Barbed edges provide positive connection. Excellent vibration re...

This Pentek 150237 1” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiffne...

This Anderson Metals hose fitting is made of brass and connects hose to threaded pipe conforming to the National Pipe Thread (NPT) standard. This adapter is for a fixed connection between plastic or rubber hose and pipe made of copper, nylon, or plastic. A barbed fitting on one end creates a tight s...

This Pentek 150469 3/4” #10 Big Blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene (HFPP) for stiff...

Kit Contains: 1 - 10215WS 5-4.5" Idler Hub 1 - HL154A Grease Cap 1 - L44649 Outer Bearing (1 1/16" ID) 1 - L68149 Inner Bearing (1 3/8" ID) 1 - 55846DL Seal 5 - X1023R Nuts

This Pentek 158116 1/4" #10 Slim Line clear filter housing is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for stre...

Kit Contains: 1 - KW10210WS 5-4.5" Idler Hub 1 - OEHL154A Grease Cap 1 - OEL44649 Outer Bearing (1 1/16" ID) 1 - OEL68149 Inner Bearing (1 3/8" ID) 1 - T555846 Seal 5 - WPX1023R Nuts

• Developed for the unique demands of 4-stroke racing motorcycles equipped with separate engines and transmissions• Formulated with extra protection for gears and bearing subject to high torque loads of today's powerful 4-stroke thumper engines• Flows freely for better clutch cooling and provides po...