The Jabsco Water Puppy pump is the standard in compact, low voltage DC, self-priming, motor driven pumps. Since the Water Puppy is self-priming, it can be located above the fluid source and installed in a convenient location, mounted in any position. Able to lift water up to 4 feet, the flexible i...

This Pentek 158116 1/4" #10 Slim Line clear filter housing is suitable for low flow rate applications that have space restrictions. The sump is made of clear styrene-acrylonitrile (SAN) for on-site viewing of flow and cartridge condition, and the cap is made of reinforced blue polypropylene for stre...

Quiet and pulsation free even at low speeds, the Aqua Jet five chamber diaphragm pump provides the perfect water pressure solution for both small and medium sized leisure and commercial boats. Efficient and compact, Aqua Jet pumps are particularly suitable where low amperage and sounds levels in rel...

Designed for quick and easy emptying of 15, 30, and 55 gallon drums. Made of polyethylene and PVC. Can be used with mild acids, light oils, water based fluids and other materials which are Not corrosive to polyethylene and PVC. (Do Not use with lacquer thinners.) Dispensing rate of 1 pint per 5 stro...

This Pentek P5-478 spun polypropylene filter cartridge reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water. It has a nominal filtration rating of 5 microns at an efficiency of 85%. The filter is made of spun polypropylene fibers for resistance to ch...

This Jabsco 4.0 GPM washdown pump provides the boater of small to medium vessels with a cost conscious and size maximized pressure pump.

Body Materials: Glass Filled PolypropyleneDiaphragm: SantopreneValves: EPDMPort Type: 1/2"" (13mm) Hose barb or ThreadMotor Type: Thermal overload protectionVoltage: 24 (Vdc)Amp Draw: 3 (amp)Fuse Size: 7 (amp)Cut-In: 20 (psi) 1.4 (bar)Cut-Out: 40 (psi) 2.8 (bar)

Body Materials: Glass Filled PolypropyleneDiaphragm: SantopreneValves: EPDMPort Type: 1/2"" (13mm) Hose barb or ThreadMotor Type: Thermal overload protectionVoltage: 24 (Vdc)Amp Draw: 3 (amp)Fuse Size: 7 (amp)Cut-In: 10 (psi) .7 (bar)Cut-Out: 25 (psi) 1.8 (bar)

Body Materials: Glass Filled PolypropyleneDiaphragm: SantopreneValves: EPDMPort Type: 1/2"" (13mm) Hose barb or ThreadMotor Type: Thermal overload protectionVoltage: 24 (Vdc)Amp Draw: 3 (amp)Fuse Size: 7 (amp)Cut-In: 20 (psi) 1.4 (bar)Cut-Out: 40 (psi) 2.8 (bar)

Body Materials: Glass Filled PolypropyleneDiaphragm: SantopreneValves: EPDMPort Type: 1/2"" (13mm) Hose barb or ThreadMotor Type: Thermal overload protectionVoltage: 12 (Vdc)Amp Draw: 6 (amp)Fuse Size: 10 (amp)Cut-In: 10 (psi) .7 (bar)Cut-Out: 25 (psi) 1.8 (bar)

With heavy-duty, glass-reinforced polypropylene construction this BANJO mini T-line strainer can resist most mineral acids, salt solutions, and solvents. Include a durable EPDM gasket for long life Color-coded screen rib eases mesh size identification T-Line Strainer, Mini, Port 3/4 In., Max. Fluid...

This is a compact size submersible water pump(none self-prime). It can be used inline or submersed for water pumping. It’s built by a brushless motor providing smooth and quiet operation than a non-brushless water pump. Plus,it will not generate ‘electric spark’ like what a brush type does so it’s m...