Pyle Part#: HTG257 796594770084 - Lanzar Amplifier Car Audio, 2,000 Watt, 2 Channel, 2 Ohm, Bridgeable 4 Ohm, MOSFET, RCA Input, Bass Boost, Mobile Audio, Amplifier for Car Speakers, Car Electronics, Crossover Network (HTG257)

Lanzar's Heritage Series Amplifiers provide high-performance sound reinforcement for all of your mobile audio equipment. The versatility enables compatibility with frequency dividing crossover networks and other audio processors to improve virtually any vehicle's customized system configuration. Amplifier features include variable high and low pass filters, nickel-plated RCA inputs, bass boost variability, and plenty more features to evolve your audio.

Features:

• 2 x 500W RMS @ 4 OHMS
• 2 x 1000W Max @ 4 OHMS
• 1 x 2000W Max @ 4 OHMS Bridged
• 2 x 650W RMS @ 2 OHMS
• Electronic Crossover Network
• Bass Boost Circuit
• Bridgeable at 4 Ohms
• 2 Ohm Stereo Stable
• Nickel RCA Inputs
• Line Outs for Left and Right Channel
• Low Pass Filter Controls
• High Pass Filter Controls
• Power and Protection LED Indicators
• Soft Turn-on/Turn-off
• THD: < 0.01%.
• S/N Ratio: > 90dB
• Channel Separation: > 65dB
• Freq. Response: 10Hz~45KHz
• HPF Freq. Response: 80KHz
• LPF Freq. Response: 50Hz-250Hz
• Subwoofer Level Control
• Fuse: 40A x 1
• Dimensions: 12.99''(L) x 2.24''(H) x 8.81''(W)
• Sold as : Unit

Features:

• AUDIO EVOLUTION: This car speakers amp features regulated MOSFET Pulse Width Modulated that maintain rated power over a wide range of battery voltage. Excellent frequency response rates place these amps in a class of their own.
• SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound.
• INTELLIGENT DESIGN: The car audio amplifier 2 channel safety features include power and protection LED indicators; soft turn-on/off; and thermal, overload, and speaker-short protection.
• RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use the line out jack as the feed to the next amp.
• POWER INPUT: The mosfet amplifier connections are for input power, chassis ground,& remote turn-on function. Use 8 gauge wiring for power & ground connections. The terminals will handle up to 4 gauge wiring with no negative effect or distortion of audio.

Catalog Numbers:

• PV1684453
• MSS1102324T02
• VCT1500D

UPCs:

• 796594770084
• 688889007510

EAN:

• 0796594770084